About
Product information

Welding stainless steel flanges inside seamed ends, the flexible connection serves as a seal without the use of a gasket ring.

The quick-connect coupling is extremely easy to fit. Pressure-resistance and the correct fitting are guaranteed by the use of clamping rings. The flexible connector seals without the use of a separate gasket ring. This reduces the risk of losing parts.

The quick-connect coupling is extremely easy to fit. Pressure-resistance and the correct fitting are guaranteed by the use of clamping rings. The flexible connector seals without the use of a separate gasket ring. This reduces the risk of losing parts.

These are based on standard pipe systems from:

  • Jacob
  • KMH
  • Noro
  • S&W

The flanges are available in:

  • Stainless steel AISI 304 / DIN 1.4301, glass bead blasted (standard)
  • Stainless steel AISI 304 / DIN 1.4301, Pickled and Passivated
  • Stainless steel AISI 316 Ti / DIN 1.4571, Pickled and Passivated
  • Aluminum AlMg3
Diameters
60 80 100 120 140
150 175 200 224 250
280 300 315 350 400
450 500 560 600  630
Lengths

The sealed in flanges are 15 mm high. The seamed in flange and plus the seam on 1 side has a height of 30mm per end. The minimum recommended length of the flexible connector is 70mm.

There is no maximum length. There is a possibility to create the absolute shortest build-in height of 40 mm with a minor alteration of 5mm Flanges, Where the Seamed end has a 20mm height.

Materials
Name Description Color Thickness Temperature range Certification
PU-UF03 Polyurethane Transparent 0,3 mm -40 to +90 FDA / ECC
PU-UF1 Polyurethane Transparent 1 mm -40 to +90 FDA / ECC
PU-UF3 Polyurethane Transparent/Milky White 1 mm -40 to +90 FDA / ECC
PTFE 310 PTFE woven fabric, Loomstate 1 side Kalanderd White 0,27 mm -60 to +200 FDA

Related products